DLE30-75-2-30 Gas Boosters

DLE30-75-2-30 Gas Boosters

dle-3-75-2
dle-30-75-2-30-arrangement
Request for Quote Order By Email

Maximator DLE30-75-2-30 Gas Booster 
Double Acting, Double Air Head, Two Stage

Capable Of Pressures As High As 30,000 PSI

Technical Data

PRESSURE RATIO 150:1
COMPRESSION RATIO 50:1
SUPPLY PRESSURE(PSI) MIN.* 220 psi
MIN.** 3000
MAX 40.0 x Pa psi
MAX OUTLET PRESSURE(PSI) 30,000 psi
STALL PRESSURE 150Pa + 2.5Ps
AIR DRIVE PORT 3/4″ NPTF
PILOT PORT 1/8″ NPTF
CONNECTIONS INLET GAS CONNECTION 1/4″ NPT
OUTPUT CONNECTION 9/16″-18(1/4″HP)
MAX FREQ. 100 Cycles/min
DISPL PER CYCLE (IN3) 3.6 in³
MAX TEMP. F 212
WEIGHT (LBS) 56 lb

Features

  • Pressures to 30,000 for most gases and 5,000 for oxygen
  • Easy to install and operate
  • Compact, lightweight design
  • Single or double acting and two stage models
  • Double air head available in single and two stage boosters
  • No electrical power required
  • Requires no lubrication
  • Boosters are contaminant free
  • Units can be operated in series or parallel
  • Variety of pressure and compression ratios available

Applications

  • High pressure gas testing or process qualification
  • Charging of accumulators
  • Boosting gas pressures from nitrogen or Oxygen bottles and generators
  • Nitrogen injection for molding machines
  • Leak detection systems
  • pressure autoclaving
  • Typical Gases – air, nitrogen, helium, oxygen, carbon dioxide, nitrous oxide, neon, argon, hydrogen, carbon monoxide, methane, ethylene and natural gas

System Accessories

All gas boosters are available with an optional air control unit (-ACP). This package is shown below and consists of an air filter, regulator with gauge, shutoff valve and necessary fittings and hose for plumbing unregulated pilot port

HPT offers a wide variety of other accessories to assist the installation of your Maximator gas booster.

  • Gas receivers
  • Pressure gauges
  • Air pilot pressure switches
  • Filters
  • High pressure valves, fittings and tubing
  • Miscellaneous plumbing components

Notes

* = Minimum required for basic operation
** = Minimum required to achieve maximum outlet pressures
Pa = Drive air pressure, 145 maximum, 15 minimum
Ps = Gas supply (suction) pressure
The 9/16-18 is a 1/4″ O.D. tubing, high pressure coned and threaded connection.
Stall pressure must not be allowed to exceed outlet pressure rating.
Compression ratio is the minimum required ratio of outlet pressure/supply pressure.

Modifications

  • DAS: Dry Air Spool
  • DASR: Dry Air Spool Modification, Pressure Reducing Regulator with Gauge and Relief Valve (For Driving Booster From N2 Gas Bottle)
  • TR: Timer Relay (Operator Can Control The Cycles Per Minute)
  • NBR: Change Seals to Nitrile Buna Rubber (For Use With CO2)
  • O2: Oxygen Cleaning & Modifications (For Use With Oxygen)
  • H2: Oxygen Cleaning & Safe Ventilation & Purging Modifications (For Use With Hydrogen)
  • SGD: Sour Gas Modification (For Driving With Sour Gas)
  • LT: Low Temperature Modification (For Use In Sub Artic Conditions)
  • HT: High Temperature Modification For Temperature of 120 °C (For L or LSF Pumps)
  • EPOXY: Epoxy Coat Booster (For Offshore Applications)

DLE30-75-2-30 Flow Chart

dle-30-75-2-30-flowchart

Bundle This Booster As A System

(Contact HPT for a system designed specific for your Application)

Gas Booster Systems

Gas Booster Systems provide a turnkey solution for customers wishing to increase their industrial gas pressures. Offered in several standard formats these systems provide a compact, portable source for increasing gas pressures. HPT Air Driven Gas Booster Systems are shipped assembled and fully tested, ready for installation. HPT Gas Booster Systems are capable of compressing most gases including nitrogen, argon, helium and hydrogen up to 36,000 psi.
Know More

Nitrogen Boosters with Pressure up to 36,000 psi

Nitrogen booster packages offer an economical method of boosting nitrogen (or other select gases or air) gas pressure up to 36,000 psi. HPT nitrogen booster package features a compact and lightweight arrangement that is turn-key and fully tested. Single and double acting nitrogen gas booster pumps are available to meet flow rate requirements. Maximator high pressure nitrogen booster pumps are capable of increasing pressures as low as 30 psi to pressures as high as 36,000 psi. Two stage nitrogen gas boosters are available for low to high pressure applications.
Know More

Oxygen Boosters

Oxygen Booster pumps are small, lightweight and economical. Oxygen gas booster packages are ideal for aircraft and bottle filling applications. Typical oxygen booster pumps are for boosting pressures up to 2,000 psi often required in the airline ground support industry and up to 3,000 psi for the diving market. However packages can be provided utilizing any of our gas boosters with maximum pressures of 5,000 psi. Single and double acting oxygen boosters are available at High Pressure Technologies to meet flow rate requirements.
Know More